Description
Solvitol “New” Water Based Spatter Release Spray (WSR13) has been specifically designed to prevent the adhesion of weld spatter to work surfaces, nozzles, jigs, fixtures, etc. It is non-flammable, economical in use, safe to use, and easily removed. It is ideal for use on stainless steel or where further treatment operations are required, i.e. painting/ galvanising.

Applications
It can be used on all types of welding operations including MIG and CO2.as well as robotics. It is formulated with the modern needs of welding in mind and as such contains no harmful solvents and is readily biodegradable. It is highly effective as well as being pleasant to use.

Benefits
 Non- flammable.
 New improved formulation.
 Economical in use.
 Prevents spatter adhesion.
 Safe to use.
 Long lasting.
 Spatter easily removed.
 Easy to apply spray application.
 Available in a 400ml aerosol.
 Dichloromethane Free.
 Non carcinogenic.

Technical Data

Appearance : Opaque milky liquid.
Contents : No silicones or chlorinated solvents.
Flashpoint : Non flammable

Pack Sizes:
Aerosol
12 x 400ml box

Directions for Use

Shake the can before use; hold upright and spray from a distance of 15- 30cm (6 -12 inches) apply a thin even coating.
 
Health and Safety
Health & Safety Information is available from the Sales Department of:
James Briggs Ltd. Salmon Fields, Royton, Oldham, OL2 6HZ. Fax 0161 627 0971
 
Where tolerances are not stated, figures are typical of normal production. Whilst every care is taken to ensure the accuracy of the material contained in the bulletin, the technical data is provided for information only. The buyer shall use its own skill and judgement to satisfy it that the products are suitable for the buyer’s purposes. The entire liability of Solvitol Limited in relation to the products shall be set out in Solvitol Limited conditions of sale, which are hereby incorporated into this bulletin. Solvitol Limited can assume no liability for the information given. 6/04